The documented inventory
| Tool family | Listed count | Fit question |
|---|---|---|
| Flexible brushes | 4 | What is the actual working diameter? |
| Micro cleaning needles | 10 | Does the manual permit a pin here? |
| Mini brushes | 5 | Can the brush enter without binding? |
| Handled brushes | 2 | Is the surface suitable for this contact? |
The two handled brushes are described in the supplied workbook as a long-handled brush and a metal-handled detail brush. Source labels vary between a wire brush and a detail brush, so this guide does not assert a precise alloy or bristle material for that individual tool.
Do not infer a diameter from a length
Image-labelled lengths in the workbook are approximate. The shipping dimensions are 33.8 × 14.7 × 1.5 cm; that is not a specification for a brush head or an internal passage. Exact brush diameters remain unconfirmed.
Check the system as well as the gun
A paint sprayer cleaning kit may refer to hand tools or to system-maintenance supplies. This set is documented as hand tools. It does not establish coverage for pumps, hoses, seals, filters or a brand’s service fittings. Graco’s airless guidance separately addresses the pump, hose, gun and filters, demonstrating why the system manual matters.
If the required dimension or material is not available, leave compatibility unresolved rather than assuming that the smallest-looking tool will fit. Next, identify which cleaner category you need.
Read the product-image lengths as reference data
The five rows below separate the listed quantities from the approximate length information.
| Tool | Pieces | Approximate image-labelled length |
|---|---|---|
| Flexible spiral tube brushes | 4 | 29 / 22 / 15 / 15 cm |
| Micro cleaning needles | 10 | 9 cm |
| Mini spiral brushes | 5 | 11 cm |
| Metal-handled detail brush | 1 | 10 cm |
| Long-handled single-sided brush | 1 | 18 cm |
The product images describe ten needle sizes and five mini-brush sizes. These are approximate overall lengths transcribed from the product images, not independent measurements or a chart of working diameters. The total is 21 pieces. The supplied package measurement is 33.8 × 14.7 × 1.5 cm; it does not specify a tool head or the opening that a tool will fit.
The listing identifies nylon brushes, flexible fine-wire tools and cleaning needles. The exact metal alloys and the bristle construction of the individual metal-handled detail brush are not established by the supplied documents.
What the listing says about intended use
The documented purpose is routine detail cleaning after painting and coating work, including hobby airbrush use. Brushes, wires and needles offer different access options around nozzles, thin tubes, internal channels and tight gaps containing paint residue or buildup. Smaller tools are intended to reach detail areas that a larger brush cannot access. Choose a tool by the cleaning area and opening size.
The listing names suction-feed, gravity-feed, HVLP, detail, touch-up, airless and compressor-driven spray guns as intended applications. These are the seller’s application categories; model-specific suitability remains unverified. Check actual tool dimensions and the equipment instructions before contact.
The listing describes use with thinners or solvents for residue removal. Select a cleaner permitted for the coating, equipment and tool materials, and verify its exposure limits. The supplied information does not establish compatibility with every solvent.
